38 Chapter 2
Operation
Using the Mixers with MMS Analyzers
Operation
Using the Mixers with MMS Analyzers

Preliminary Operation

NOTE This section provides information for the Agilent 70907A (or B), however the
operation of the Agilent 70909A and Agilent 70910A is similar. Minor
differences may be noted, but the necessary deviations from these exact
instructions will be obvious.
Equipment Connection
Connect the equipment as shown in Figure 2-16 Use the following checklist to verify the
connections:
•Agilent 11970 LO IN to Agilent 70907B LO OUTPUT (SMA cable, 5061-5458)
•Agilent 11970 IF OUT to Agilent 70907B IF INPUT (SMA cable, 5061-5458)
Figure 2-16 Agilent 11970 Connections to the Agilent 71000 Series Spectrum Analyzer