General Information
Specifications
Table 1-1 11970 Series Specifications
NOTE
Unless otherwise stated, all specifications apply for an IF of 321.4 MHz and for RF input amplitudes of less than
General Information
MODEL 11970V
RF Frequency Range:
50 - 75 GHz
LO Harmonic Number: 14
LO Input Frequency Range:
3.55 - 5.33 GHz
Maximum Conversion Loss: 40 dB
8566B Noise Level at 1 kHz Bandwidth, and
14.5 to 16 dBm
LO Input Power:
Frequency Response at 14.5 to 16 dBm LO Input Power: ± 2.1 dB
Frequency Response at 14 to 18 dBm LO Input Power: ± 2.8 dB
MODEL 11970W
RF Frequency Range:
75 - 110 GHz
LO Harmonic Number: 18
LO Input Frequency Range:
4.15 - 6.09 GHz
Maximum Conversion Loss: 46 dB
8566B Noise Level at 1 kHz Bandwidth, and LO Input
Power: - 85 dBm
Frequency Response at 14.5 to 16 dBm LO Input Power: ± 3.0 dB2
Frequency Response at 14 to 18 dBm
LO Input Power: ± 4.0 dB
1.The 11975A Amplifier, or a similar amplifier, can be used to provide sufficient LO power (14 to
18 dBm) to the mixers. Leveled power capability of 16 dBm, as is available with the 11975A, is nec- essary to achieve the maximum amplitude accuracy with the mixers. Assuming the 1 meter cables supplied with the instrument are used, only the 8566B LO output requires amplification. However, if longer or lower quality cables are used LO amplification may be necessary.
2.Typically ± 2.5 dB with LO supplied by 8566B Spectrum Analyzer, 11975A Amplifier set to 16 dBm, and P/N
14 | Chapter 1 |
