Agilent Technologies 6010a, 6011A, 6012B, 6015A service manual 124

	In the option 002 replaceable parts list change cover plate from p/n 06023-00025 to p/n 06023-
	00013. Add cover-plate p/n 06023-00010.
6015A	In the parts list for the A1 Main Board Assembly change U1 to p/n 1906-0218. In the parts list
	for the A5 Diode Board, change L1 to p/n 06011-80094.

CHANGE 10

6010A, 6011A, In the parts list for the Mechanical Chassis change the following parts:

6012B		From:	To:
	Top cover	06032-00020	06032-00002
	Bottom cover	06032-00019	06032-00003
	Top trim	5041-8802	5040-7202
	Side trim	5001-0539	5001-0439
	Front frame	5021-8403	5021-5803
	Feet	5041-8801	5040-7201
	Strap handle	5062-3703	5060-8903
	Handle ret. back	5041-8820	5041-6820
	Handle ret. front	5041-8819	5041-6819
	Lettered panel	06010-00009	06010-00008
6015A	In the parts list for the A1 Main Board Assembly delete T3 and the following mechanical
	attaching parts:
	Screw, p/n 0515-0964
	lock washer p/n 2190-0586
	flat washer, p/n 3050-0893
	clamp, p/n 06671-400002
	bracket, p/n 06671-400003
CHANGE 11
6010A	In the Diode board A5 parts list and schematic diagram delete CR6.
6011A	In the Diode board A5 parts list and schematic diagram change R17 from 2.87K 1%, p/n 0698-
	3151 to 4.87K 1%, p/n 0698-4444.
6012B	In the Diode board A5 parts list and schematic diagram change R2 from 2.87K 1%, p/n 0698-
	3151 to 4.87K 1%, p/n 0698-4444.
CHANGE 12
6010A	In the Diode board A5 parts list and schematic diagram change R2 from 2.87K 1% p/n 0698-
	3151 to 4.87K 1%, p/n 0698-4444.
6011A	In the option 002 (Appendix A) parts list and schematic diagram delete R57 and solder pin p/n
	0360-1300.
6012B	In the Diode board A5 parts list and schematic diagram change CR4 to p/n 1901-0887. Delete
	heatsink (ref. Q2) p/n 06032-0018, heatsink bracket 06032-00017 and replace with inner heatsink
	(ref. Q2) p/n 06032-00006 and outer heatsink (ref. Q2) p/n 06032-00018.

124