57
5
Replaceable Parts
Introduction
This chapter contains information for ordering replacement parts. Table 5-3 lists parts in alpha-numeric order by reference
designators and provides the following information:
a. Reference Designators. Refer to Table 5-1.
b. Agilent model in which the particular part is used.
c. Agilent Part Number.
d. Description. Refer to Table 5-2 for abbreviations.
Parts not identified by reference designator are listed at the end of Table 5-3 under Mechanical and/or Miscellaneous.
Table 5-1. Reference Designators
AAssembly
BBlower
C Capacitor
CR Diode
DS Signaling Device (light)
FFuse
FL Filter
G Pulse Generator
J Jack
KRelay
L Inductor
Q Transistor
RResistor
RT Thermistor Disc
S Switch
TTransformer
TB Terminal Block
TS Thermal Switch
U Integrated Circuit
VR Voltage Regulator (Zener diode)
W Wire (Jumper)
XSocket*
Y Oscillator
* Reference designator following "X" (e.g. XA2) indicates assembly or device mounted in socket.