Manuals / Agilent Technologies / Lawn and Garden / Portable Generator

Agilent Technologies 665xA, 664xA, 667xA, 668xA manual Installing the Series 669xA Power Cord

Models: 668xA 669xA 667xA 664xA 665xA

1 142
Download 142 pages 24.05 Kb
Page 48
Image 48

Figure 2-5. Connecting the Series 668xA Power Cord

Installing the Series 669xA Power Cord

The Series 669xA power supply requires a 3-phase power source that provides 9000 VA (7950 W) maximum. The supply has a delta input (no neutral connection) and will accept power from either delta (triangle) or wye (star) sources. Two voltage ranges are available (see "AC Input Ratings" in Table 1-4a). In order to maintain phase current balancing, the

power source should be a dedicated line with only Agilent Technologies Series 668xA/669xA supplies drawing current from it. A disconnect box located near the power supply (see Figure 2-4) is recommended for all power cords with plugs and is

mandatory for hard-wired power installations.

The power cords supplied with the power supply do not include a power plug (see "Options" in Chapter l) at one end of the cord. Wires are partially stripped back and a ground lug is attached to the other end of the cord.

Installation of the power cord must be done by a qualified electrician and in accordance with the local electrical code.

See Figure 2-6 and proceed as follows:

l. Check the line fuses ( , Figure 2-6) as follows:

a.Examine the LINE RATING label on the rear panel to make sure the correct voltage and fuses are indicated.

b.Pull back on the lever located on each fuseholder and verify that all fuses are as specified on the label.

c.Make sure that the fuse indicator pin located in the center of the fuse is facing OUT, not IN

d.Close the fuseholder.

e.Check to make sure that the red flag does not appear in the fuse holder window after you close the fuseholder.

When installing the fuses, make sure that the fuse indicator pin located in the center of the fuse is facing OUT, not IN.

2.Open the line clamp . Position the insulating sheath over the end of the line cord where it passes through the cable clamp. Insert the line cord and sheath through the cable clamp making sure that the sheath is between the cord and the clamp.

48 Installation

Page 47 Page 49
Page 48
Image 48
Agilent Technologies 665xA, 664xA, 667xA Installing the Series 669xA Power Cord, Connecting the Series 668xA Power Cord
Page 47 Page 49

668xA, 669xA, 667xA, 664xA, 665xA specifications

Agilent Technologies has long been a pioneer in the production of high-performance electronic test and measurement instruments, particularly in the field of power sources. Among its notable offerings are the Agilent 667xA, 669xA, 665xA, 664xA, and 668xA series of power supplies. These instruments are designed to provide stable, reliable power for a variety of applications, including electronic testing, industrial processes, and research laboratories.

The Agilent 667xA series is characterized by its programmability and advanced measurement functions. These power supplies support a wide range of output voltages and currents, allowing for flexible configurations that cater to different testing needs. The built-in measurement capabilities enable users to monitor the voltage, current, and power with high precision, which is essential for ensuring optimal performance in electronic applications.

The Agilent 669xA series stands out with its high-power outputs, making it suitable for demanding applications. These power supplies deliver high voltage and current levels, making them ideal for testing high-performance devices, such as power amplifiers and motor drives. Additionally, the 669xA series includes features such as overvoltage protection and complex output sequencing to enhance the safety and reliability of the testing process.

The Agilent 665xA and 664xA series focus on delivering high accuracy and excellent regulation. These models are particularly known for their low noise operation, which is critical for sensitive applications where precision is paramount. The integrated programming capabilities allow users to automate testing sequences, thus improving efficiency in research and development settings.

The 668xA series features advanced digital signal processing that enhances the precision and stability of the output. Users benefit from features like remote sensing and monitoring, allowing feedback adjustments that maintain output accuracy despite cable losses. Furthermore, the 668xA models can integrate seamlessly with various test environments thanks to their LAN, GPIB, and USB connectivity options.

Overall, the Agilent 667xA, 669xA, 665xA, 664xA, and 668xA power supplies provide a comprehensive range of solutions for diverse electronic testing needs. With their advanced features, superb measurement capabilities, and robust performance, these instruments empower engineers and researchers to conduct their work with confidence, precision, and efficiency.