Agilent Technologies E3632A Bad OVP cal data, Bad OCP cal data, Bad DAC DNL error correction data

Chapter 5 Error Messages

Calibration Errors

714	Bad OVP cal data
	The overvoltage protection calibration constant is out of range. Note that the
	new calibration constants are not stored in the non-volatile memory.
715	Bad OCP cal data
	The overcurrent protection calibration constant is out of range. Note that the
	new calibration constants are not stored in the non-volatile memory.
716	Bad DAC DNL error correction data
	Invalid data measured during the calibration for DAC differential nonlinearity
	error correction.
717	Cal OVP or OCP status enabled
	Overvoltage protection status or overcurrent protection status is enabled. You
	must set both overvoltage and overcurrent protection status to OFF before and
	during the calibration.
740	Cal checksum failed, secure state
741	Cal checksum failed, string data
742	Cal checksum failed, store/recall data in location 0
743	Cal checksum failed, store/recall data in location 1
744	Cal checksum failed, store/recall data in location 2
745	Cal checksum failed, store/recall data in location 3
746	Cal checksum failed, DAC cal constants
747	Cal checksum failed, readback cal constants
748	Cal checksum failed, GPIB address
749	Cal checksum failed, internal data
750	Cal checksum failed, DAC DNL error correction data

130