Installing Your Analyzer

STEP 5. Verify the Analyzer Operation

To Test the Reflection Mode

1.Connect the equipment as shown and press

Preset .

2.Look at the measurement trace displayed on the analyzer. It should be similar to the trace below.

3.ES models only: Check the reverse reflection mode for channel 1 by pressing

Meas Refl: REV S22 (B/R) . The measurement trace should be similar to the trace shown below.

4.If you are ready to start making measurements, continue with the next chapter, “Quick Start: Learning How to Make Measurements.”

Chapter 1

1-25

Page 31
Image 31
Agilent Technologies 8753ET, ES quick start To Test the Reflection Mode