Agilent Technologies N5181A/82A, N5183A MXG, E8663B manual Sockets on Windows

Programming Examples

LAN Programming Interface Examples

2.At the UNIX prompt in your home directory type: cc -Aa-O-o lanio lanio.c

3.At the UNIX prompt in your home directory type: ./lanio xxxxx “*IDN?” where xxxxx is the hostname for the signal generator. Use this same format to output SCPI commands to the signal generator.

The int main1() function will output a sequence of commands in a program format. If you want to run a program using a sequence of commands then perform the following:

1.Rename the lanio.c int main1() to int main() and the original int main() to int main1().

2.In the main(), openSocket() function, change the “your hostname here” string to the hostname of the signal generator you want to control.

3.Re- save the lanio.c program.

4.At the UNIX prompt type: cc -Aa -O -o lanio lanio.c

5.At the UNIX prompt type: ./lanio

The program will run and output a sequence of SCPI commands to the signal generator. The UNIX display will show a display similar to the following:

unix machine: /users/mydir $ ./lanio

ID: Agilent Technologies, E4438C, US70000001, C.02.00

Frequency: +2.5000000000000E+09

Power Level: -5.00000000E+000

Sockets on Windows

In Windows, the routines send() and recv() must be used, since fread() and fwrite() may not work on sockets. The following steps outline the process for running the interactive program in the Microsoft Visual C++ 6.0 environment:

1.Rename the lanio.c to lanio.cpp and getopt.c to getopt.cpp and add them to the Source folder of the Visual C++ project.

NOTE The int main() function in the lanio.cpp file will allow commands to be sent to the signal generator in a line- by- line format; the user types in SCPI commands. The int main1(0) function can be used to output a sequence of commands in a “program format.” See Programming Using main1() Function below.

2. Click Rebuild All from Build menu. Then Click Execute Lanio.exe. The Debug window will appear with a prompt “Press any key to continue.” This indicates that the program has compiled and can be used to send commands to the signal generator.

3.Click Start, click Programs, then click Command Prompt. The command prompt window will appear.

4.At the command prompt, cd to the directory containing the lanio.exe file and then to the Debug folder. For example C:\SocketIO\Lanio\Debug.

106 Agilent N518xA, E8663B, E44x8C, and E82x7D Signal Generators Programming Guide