Airlink101 AR550W3G user manual Outbound Packet Filter, Allow / Deny all to pass except, Source IP

Parameters	Description
Outbound Packet Filter	Check/uncheck Enable to enable/disable the Packet Filtering.
Allow / Deny all to pass except	Please select “Allow” or “Deny” to decide the behavior of packet
those match the following rules	filtering table. If you select Allow, all traffic will be allowed except
	the Source IP addresses listed in filtering table. If you select Deny,
	all traffic will be denied except the Source IP address listed in
	filtering table.
Source IP	Please input the client’s IP address you wish to apply the filtering
	rule. You can input a single IP address (192.168.2.10) or a range
	of IP addresses (192.168.2.10-192.168.2.50). Leaving this field
	blank indicates all IP addresses.
Destination IP	Please input the Destination IP address (i.e. an FTP site, Email
	server, etc.) you wish to apply the filtering. You can input a single
	IP address (192.168.2.10) or a range of IP addresses
	(192.168.2.10-192.168.2.50). Leaving this field blank means all
	43