Maximum Idle Time | Airlink101 AR550W3G instruction

iBurst WAN Type: The information on this page will only be used when your service

provider requires an account and Password to connect to the iBurst network.

Parameter	Description

Account	Enter the User Name for your USB modem here. You can obtain
	this information from your ISP.
Password	Enter the password for your USB modem here. You can obtain
	this information from your ISP.
Primary DNS	This feature allows you to assign a Primary DNS Server. You can
	obtain this information from your ISP.
Secondary DNS	This feature allows you to assign a Secondary DNS Server. You
	can obtain this information from your ISP.
Connection Control	There are 3 modes for you to control the 3G connection:
	Connect-on-demand:Router will connect to the ISP when its
	clients send outgoing packets.
	Auto Reconnect (Always-on):Router will keep the connection
	to the ISP after the connection is established.
	Manually: Router will not connect to the ISP until user clicks the
	Connect button on the Status-page.
Maximum Idle Time	The amount of time of inactivity before disconnecting your
	PPPoE session. Set it to zero or enable “Auto-reconnect” to
	disable this feature.

27

Image 31

Airlink101 AR550W3G user manual Maximum Idle Time

Contents

Wireless N 150 3G/3.75G Travel Router Copyright Table of Contents Wireless Modem Status Wireless Status Statistics Information Product Information Introduction and safety information Safety Information System Requirements Package Contents Hardware Overview Hardware Configuration Hood Assembly LED Indicators Use Power Adapter Configure the Router Use USB Cable Windows 7 / Vista Users View Available WirelessPage Select language then click Next to continue Click on Wizard Page Page Page Page Click Finish Using Web Configuration Utility Page Wizard Page Page Page Click Finish Basic Settings Advanced Settings LAN IP Address Network SetupLAN Setup Internet Setup 3G Network Dial-Up ProfileCountry Telecom Primary DNS PasswordAuthentication Account Maximum Idle Time NAT Disable Service NameAssign IP Address Page Page Dhcp Server Fixed Mapping Previous / Next Enable Channel WirelessTransmit Power Network ID Ssid Encryption Wireless ModeWPS Setup Wireless Client List Configuring WPA-PSK / WPA2-PSK Encryption Configuring WEP EncryptionEncryption WPS Setup Page Config Status Config ModeConfig Method WPS Status Wireless Client List Reconfirm Change PasswordOld Password New Password Packet Filtering Security Settings Source IP Outbound Packet FilterAllow / Deny all to pass except Those match the following rules MAC Level Port URL Blocking URL Blocking MAC Control MAC Access ControlAssociation Control Or denies wireless association from clients whose MAC Discard Ping from WAN side Administrator Time-outRemote Administrator Host Port Miscellaneous Advanced Setting System Log Click on Save after you finished all settings System Time Toolbox System Info Firmware Upgrade Reset to Default Backup Setting UPnP Setting Domain Name or IP Address for Ping Test Reboot Status System Status Wireless Status Troubleshooting Router again if you use 3G service to access Internet Appendix a Hardware Specification Technical Support