Alamo RX96 manual Tools Needed for Disassembly and Assembly of T Gearbox

MAINTENANCE

TOOLS NEEDED FOR DISASSEMBLY AND ASSEMBLY OF T GEARBOX

1.Caulking Gun w/ #5900 Locktite

2.Impact Wrench

3.Ball Pin Hammer

4.Torque Wrench

5.Retaining Ring Pliers

6.3/16" Punch

7.10 mm & 14 mm Socket

8.Locktite #270

BE CERTAIN TO CLAMP OR SECURELY SUPPORT THE GEARBOX AND SUB- ASSEMBLIES TO PREVENT INJURIES TO HANDS AND FEET DUE TO INADVERTENT DROPPING OR FALLING OVER.

ALWAYS WEAR SAFETY GLASSES AND GLOVES TO PREVENT EYE AND HAND INJURY WHEN CHISELING OR HAMMERING ON METAL COMPONENTS. HARDENED METAL WILL CHIP UN-EXPECTEDLY.

AN ASSEMBLED GEARBOX IS QUITE HEAVY. USE A HOIST OR GET HELP TO HANDLE THEM SAFELY. LIFT CAREFULLY AND PROPERLY USING YOUR LEGS TO LIFT - NOT YOUR BACK.

NOTICE: REFER TO OPERATOR'S MANUAL FOR INSTRUCTIONS FOR PROPER RE-ASSEMBLY ONTO THE MOWER DECK. TIGHTEN CORRECTLY.

RX96 03/09 Maintenance Section 5-15

© 2009 Alamo Group Inc.

MAINTENANCE