Alamo RX96 manual Operation

OPERATION

1.Standard Equipment and Specifications

	RX96
Horsepower Required	30 HP Min. (Pull)
	55 HP (Lift)
	30 HP (Semi-Mount)
Cutting Capacity (Max.)	2-1/2”
Cutting Height	1-12”
Safety Deflector	Std.
Cutting Width	97”
Overall Length	101” (Lift, Semi-Mount)
	136” (Pull)
Weight (Approx.)	1634 lbs
Hitch	CAT II-III and Q.H. (Lift)
	Clevis (Pull)
	CAT II (Hydraulic Offset Unit) (Semi-Mount)
Blade Carrier	Pan
Blade Tip Speed (FPM)	17,004 (540 RPM)
	16,821 (1000 RPM)
Center Gearbox Rating	120 HP
Outboard Gearbox Rating	110 HP
Output Shaft Diameter	2”
Driveline Size	Cat 4
Deck Thickness	10 Ga.
Side Skirt	1/4” x 10”
Transport Width	104”
Jack Stand	Std. (pull)
Overall Width	104”
Replaceable Skid Shoes	Std.
Blade Overlap	4”
Tractor Static Vertical Drawbar Load Rating (Min.)	960 lbs.

The Mower is designed for certain mowing applications and is rated to cut up to a specific size vegetation (see Mower Standard Equipment and Specifications). DO NOT use this mower to cut vegetation above the Mower’s rated capacity or to cut any type of non- vegetative material. Only operate this Mower on a properly sized and equipped Tractor. Operating this Mower in an application for which it is not designed and/or operating the Mower with the wrong size Tractor can cause Mower component damage and equipment failure resulting in possible serious injury or death. (SGM-14)

RX96 03/09 Operation Section 4-3

© 2009 Alamo Group Inc.

OPERATION