Alamo RX96 manual Rear Deflector Figure Asm-R-0294

ASSEMBLY

FRONT AND REAR DEFLECTORS (Standard Equip.) CHAINGUARDS (Optional Equip. at Extra Cost)

Front and Rear Rubber-Fabric Deflectors are Standard Equipment and Front and Rear Chainguards are optional at extra cost. One type of guards must be installed (and maintained in good repair) except for agricultural purposes only in areas where persons, vehicles, livestock, or other property will not be endangered by thrown objects and where such safety equipment would prevent the mower’s reasonable performance of its assigned agricultural task.

DEFLECTORS: Front and Rear Deflectors (Standard Equipment) are recommended for the average user and will provide protection from thrown objects with proper operation under normal conditions. Deflectors must be maintained in good repair or replaced after no more than two inches of wear off lower edge.

Figure Asm-R-0293 & Asm-R-0294

Front Deflector - (FIGURE Asm-R-0293)

Attach the front Rubber Deflectors (1) to the

Mower with Bracket Straps (2), 1/2" x 1-1/4"

Bolts (7), Flatwashers (8) and Locknuts (6).

Rear Deflector - (FIGURE Asm-R-0294)

Attach the rear Rubber Deflectors (1) to the

Mower with Bracket Straps (2) 1/2" x 1-1/4"

Bolts (4), and Locknuts (3).

RX96 03/09 Assembly Section 3-7

© 2009 Alamo Group Inc.

ASSEMBLY