MAINTENANCE
GEARBOX
The Gearbox has been filled with lubricant to the Test Plug Level prior to shipment. However, you should check the oil level at Test Plug before operating, and frequently thereafter.
The gearbox should not require additional lubricant unless the box is cracked or a seal is leaking. It is recommended that the oil level plug be removed after every 8 to 10 hours of operation and oil added until it runs out Test Plug hole. Figures
CENTER GEARBOX | SECONDARY GEARBOX |
Required lubricant is NLGI 000 Grease (P/N 00765444). The outer gearbox capacity is three quarts and the center gearbox has a five quart capacity.
NOTE: Overfilling the Gearbox will cause pressure to build up and cause Oil Seals to leak.
If the Gearbox suddenly starts making an unusual noise, stop at once, check for leaks, and refill Gearbox as required.
TAIL WHEEL ASSEMBLY
Tail Wheel Bearings are packed at the factory with
RX96 03/09 | Maintenance Section |
© 2009 Alamo Group Inc.
