Alamo RX96 manual Operation

OPERATION

OPERATION

•Lift Type-Ensure the tailwheel beam position support bolts are properly installed and tightened.

•Pull and Semi-Mount Type-Ensure that the tailwheel ratchet or hydraulic cylinder is installed and retained correctly to provide the desired cutting height.

•Inspect all bolts and screws and tighten to the recommended torque. OPS-R-0039_F

•Ensure the tractor PTO master shield and the mower slip clutch shield are in place, lowered, and in good condition.

•Ensure the driveline integral shield is in good condition and rotates freely.

•Ensure the driveline slip clutch (if equipped) is properly adjusted. OPS-R-0039

•Perform scheduled lubrication as specified in the maintenance section.

•Inspect each gearbox oil level using dipstick level indicator and replenish if needed. A low oil level is a warning sign that the gearbox may be cracked or its seal is damaged and needs to be replaced.

•Ensure all gearbox vents are in place and free from clogs. OPS-R-0011_E

RX96 03/09 Operation Section 4-22

© 2009 Alamo Group Inc.