Alamo RX96 manual Front Chainguard Figure Asm-R-0295, Rear Chainguard- Figure Asm-R-0296

ASSEMBLY

ASSEMBLY

FRONT AND REAR DEFLECTORS (Standard Equip.) CHAINGUARDS (Optional Equip. at Extra Cost)

CHAINGUARDS: Front and Rear Chainguards (Optional Equipment) are recommended for higher than normal usage (100 hours or more per year) and will provide protection from thrown objects with careful operation. Chainguards must be maintained in good repair by replacing missing or worn sections or by being replaced when seriously worn or damaged. Figure Asm-R-0295 & Asm-R-0296

Front Chainguard - (FIGURE Asm-R-0295)

Attach the right and left Chainguard assemblies (1) to the mower with 1/2” x 1-1/4” bolts(2), Lockwashers (4), and Flatwashers

(3). Then attach Chainguard Brackets, left (10) and right (9) to mower with 1/2” x 1-1/4” Bolts

(2). Flatwashers (3), and Locknuts (4).

Rear Chainguard- (FIGURE Asm-R-0296)

Attach the right and left Chainguard assemblies 91) to the mower with 1/2” x 1-1/4” Bolts (2), Flatwashers (3), and Locknuts (4).

RX96 03/09 Assembly Section 3-8

© 2009 Alamo Group Inc.