Verifying OSPF Configuration

Configuring OSPF

 

 

 

 

Verifying OSPF Configuration

To display information about areas, interfaces, virtual links, redistribution, or OPSF in general, use the show commands listed in the following table:

show ip ospf

Displays OSPF status and general configuration parameters.

show ip ospf border-routers

Displays information regarding all or specified border routers.

show ip ospf ext-lsdb

Displays external Link State Advertisements from the areas to which the

 

router is attached.

show ip ospf host show ip ospf lsdb show ip ospf neighbor show ip ospf redist-filter show ip ospf redist

Displays information on directly attached hosts.

Displays LSAs in the Link State Database associated with each area. Displays information on OSPF non-virtual neighbor routers Displays OSPF redistribution filter attributes.

Displays the specified redistribution instance that allows routes to be redistributed into OSPF.

show ip ospf routes

Displays OSPF routes known to the router.

show ip ospf virtual-link

Displays virtual link information.

show ip ospf virtual-neighbor

Displays OSPF virtual neighbors.

show ip ospf area

Displays either all OSPF areas, or a specified OSPF area.

show ip ospf area range

Displays all or specified configured area address range summaries for

 

the given area.

show ip ospf area stub

Displays stub area status.

show ip ospf interface

Displays OSPF interface information.

show ip ospf restart

Displays the OSPF graceful restart related configuration and status.

For more information about the resulting displays form these commands, see the “OSPF Commands” chapter in the OmniSwitch CLI Reference Guide.

Examples of the show ip ospf, show ip ospf area, and show ip ospf interface command outputs are given in the section “OSPF Quick Steps” on page 1-4.

page 1-38

OmniSwitch 6600 Family Advanced Routing Configuration Guide March 2005

Page 48
Image 48
Alcatel Carrier Internetworking Solutions 060187-10 REV D manual Verifying Ospf Configuration