Connect System Cables Service Modules with RJ21connectors
Telesyn 9100 Installation Guide (Installation of Allied Telesyn 9100)

1-28

1.13 Connect System Cables
The following figure illustrates system cable connector locations.
FIGURE 1-16 9101 Cable Connections - To Be Supplied

1.13.1 Service Modules with RJ21connectors

Note: Be sure to include in the cable length the overall maximum loop length to the customer
premises.
1. Attach the connectorized end of the RJ21 cable to the RJ21 based card.
2. Use the screw and a tie wrap to secure it in place.
Note: Do not over-tighten the screw. Hand tighten to secure. Then install the tie wrap, pulling it snug
enough to secure the connector.
FIGURE 1-17 RJ-21 Cable Connector