AT-MC601, AT-MC602 Installation and User’s Guide

Installing the AT-MC602 Provider Unit

Using the Provider Unit on a Desktop

The AT-MC602 Provider unit can be installed in an AT-MCR12 rackmount chassis, used as a desktop device, or mounted onto a wall using the keyholes on the bottom of the unit. The screws and plastic anchors used for mounting the unit are provided.

Warning

To prevent exposure to electric shock, the AT-MC602 Provider Unit must be installed in a RESTRICTED ACCESS LOCATION and performed by QUALIFIED SERVICE PERSONNEL.

Note

For Finland, Norway, and Sweden – When the AT-MC602 and the AT-MCR12 are used, a permanent ground conductor must be installed on the AT-MCR12 chassis.

For installation instructions of this ground conductor, refer to the AT- MCR12 Media Converter Rackmount Chassis Installation Manual (PN 613-10725-00).

To use the Provider unit on a desktop, perform the following procedure:

1.Remove all equipment from the package and store the packaging material in a safe place.

2.Attach the four protective feet (provided) to each corner of the bottom of the unit, as illustrated in Figure 6.

VDSLEXTENDEDETHERNET

AT-MC602

MGMT

 

PSTN

PWR

LINK

ACT

ERR

LINK

LINE

100BaseTX

10BaseT/

 

Figure 13 Attaching Protective Feet to the Provider Unit

28