Preface, How This Guide is Organized | Allied Telesis AT-MC601

Preface

This guide contains instructions on how to install and configure the

AT-MC601 and AT-MC602 Extended Ethernet units.

How This Guide is Organized

This manual contains the following chapters and appendices:

Chapter 1, Product Description, describes the features and components of the network extenders.

Chapter 2, Installation, contains installation instructions for each unit.

Chapter 3, Configuration, explains how to use the configuration software. The AT-S57 software is used to configure the network extenders.

Chapter 4, Troubleshooting, provides information on how to resolve common problems that might occur with the network extenders.

Appendix A, Default Settings, lists the default software settings.

Appendix B, Technical Specifications, lists the technical specifications for the network extenders.

Appendix C, Translated Electrical Safety and Emission Information,

contains multi-language translations of the warnings and cautions in the manual.

6

Image 6

Allied Telesis AT-MC601 manual Preface, How This Guide is Organized

Contents

Installation and User’s Guide Page Electrical Safety and Emission Statement Contents Appendix a Preface How This Guide is Organized Document Conventions Contacting Allied Telesyn Technical Support Summary of Features Product Description Overview Ethernet Port AT-MC601 Subscriber Unit AT-MC602 Provider Location of Components AT-MC601 Hardware Features Pin Assignment Pstn Port 10/100 Mbps Twisted Pair Ethernet Port Pin MDI Signal MDI-X Signal TX+ RX+ 10/100Base-TX Port Management CableColor Description Line Port DC Power Supply Input Port External AC/DC Power Adapter RS-232 Pin DIN Pin Signal Software Features Installation Installation Safety Precautions Additional Compliance Statements Selecting a Site for the Network Extender Cables Port Connector Cables Not Included Unpacking the Network Extender Installing the AT-MC601 Subscriber Unit Using Subscriber Unit On a DesktopWall-Mounting Subscriber Unit Positioning The Switch Onto The Wall Screws Pstn to Telephone Powering On the Subscriber Unit MCR Installing the AT-MC602 Provider Unit Using the Provider Unit on a Desktop Wall-Mounting Provider Unit Grounding the Provider Unit Rack-Mounting Provider Unit Rack Mount Set in Rack Internet Service Provider Provider Unit Powering On the Provider Unit Warranty Registration Configuration Starting a Configuration Session Downloading Software Updates Cabling Preparations Opening Configuration Software Configuring the Provider Unit Configuration Min Mbps Upstream/DownstreamActual Mbps Max Mbps Apply About Mean Square Error SNR of Received SignalCorrected RS errors /s Full Constellation Link TC Synchronized Signal DetectedReduced Constellation Link Ethernet Encapsulation Sync Collision Counters Error CountersTxRx Counters Clear Stop/Start Configuring the Subscriber Unit InstallNormal AT-MC601, AT-MC602 Installation and User’s Guide Troubleshooting Communication Error Message Cant read link status AT-MC601, AT-MC602 Installation and User’s Guide Default Configuration Settings Technical Specifications Physical Specifications Safety and Electromagnetic Compatibility Certifications Translated Electrical Safety and Emission Information Temperature of 40 degrees C Lightning Danger Gefahr Durch Blitzschlag Umgebungstemperatur von nicht mehr als 40 C entworfen Maksimum 40 grader C Lovgivning for elektriske installationerFare Under Uvejr 10 Veiligheid Gevaar Voor BlikseminslagBedragen dan 40 graden Celsius Ambiante maximum de 40 degrés Celsius Salamaniskuvaara 40 C Pericolo Di Fulmini Ambientale massima di 40 gradi centigradi Sikkerhet Fare For LynnedslagPå 40 grader celsius Perigo De Choque Causado Por Raio Ambiente máxima de 40 graus centígrados Peligro De Rayos Temperatura ambiental máxima de 40 grados C Fara För Blixtnedslag Grader Celsius