Allied Telesis AT-MC602

AT-MC601 and AT-MC602 Installation and User’s Guide

The VDSL Status screen is displayed in Figure 23.

Figure 23 VDSL Status

The parameters on the VDSL Status screen are described below. These

parameters are for viewing and monitoring purposes only. They cannot

be changed manually.

SNR of Received Signal

The Signal-to-Noise Ratio on the VDSL line, measured in decibels. The

SNR is a parameter of the constellation of the receive signal.

Corrected RS errors /s

Number of corrected Reed-Solomon errors per second.

Mean Square Error

An indication of the symbol error rate, measured in decibels.

Full Constellation Link

The highest possible QAM (Quadrature Amplitude Modulation)

constellation, which enables the highest line rates.

Contents

Main Page Electrical Safety and Emission Statement Page Contents Page Preface How This Guide is Organized Document Conventions Contacting Allied Telesyn Technical Support Chapter 1 Product Description Summary of Features Overview Location of Components Figure 2 illustrates the front panels of the AT-MC601 and AT-MC602 network extenders. Figure 3 Rear Panel Hardware Features VDSL Line Port PSTN Port 10/100 Mbps Twisted Pair Ethernet Port Page Status LEDs MGMT Port Management Cable AC Power Supply Input Port External AC/DC Power Adapter Software Features Chapter 2 Installation Installation Safety Precautions Additional Compliance Warning Statements Selecting a Site for the Network Extender Cables Not Included Unpacking the Network Extender Installing the AT-MC601 Subscriber Unit Using the Subscriber Unit on a Desktop Wall-Mounting the Subscriber Cabling the Subscriber Unit Powering On the Subscriber Installing the AT-MC602 Provider Unit AT-MC601 and AT-MC602 Installation and Users Guide 31 2. Then, set the slider in the chassis, as shown in Figure 14. VDSL EXTENDED ETHERNET AT-MC601 Figure 14 Rack Mount - Set in Rack POWER Cabling the Provider Unit Figure 16 PSTN to Telco PBX Line MCR12 Internet Service Provider Telco PBX Line Powering On the Provider Page Chapter 3 Configuration Starting a Configuration Session Downloading Software Updates Cabling Preparations Opening the Configuration Software Configuring the Provider Unit Configuration Page VDSL Status Page Ethernet Status Page Page Configuring the Subscriber Unit Page Chapter 4 Troubleshooting LEDs Error Messages Page Page Appendix A Default Configuration Settings Appendix B Technical Specifications Physical Specifications Environmental Specifications Power Specifications Page Appendix C Translated Electrical Safety and Emission Information