AT-MC601 and AT-MC602 Installation and User’s Guide
55
Standards: This product meets the following safety standards.
1RFI Emission EN55022 Class A, FCC Part 15 Class A, C-TICK
2Immunity EN55024
3Electrical Safety EN60950, UL60950, FCC Part 68
Safety
4Power to the hub must be sourced only from the adapter.
Europe—EC
Use TÜV licensed AC adapter of 12 V DC, min 500 mA.
Other Countries
Use a Safety Agency Approved AC adapter of 12 V DC, min 500 mA.
5Caution: Power cord is used as a disconnection device. To de-energize equipment
disconnect the power cord.
6 Lightning Danger
Danger: Do not work on equipment or cables during periods of lightning activity.
7Do not block air vents.
8Do not connect a telephone line into the signal connector.
9 Operating Temperature: This product is designed for a maximum ambient
temperature of 40 degrees C.
10 All Countries: Install product in accordance with local and National Electrical Codes.
U.S. Federal Communications Commission
Radiated Energy
Note: This equipment has been tested and found to comply with the limits for a Class A
digital device pursuant to Part 15 of FCC Rules. These limits are designed to provide
reasonable protection against harmful interference when the equipment is operated in a
commercial environment. This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with this instruction manual, may cause
harmful interference to radio communications. Operation of this equipment in a residential
area is likely to cause harmful interference in which case the user will be required to correct
the interference at his own expense.
Note: Modifications or changes not expressly approved of by the manufacturer or the FCC,
can void your right to operate this equipment.
FCC Part 68 Product Identifier
This equipment complies with Part 68 if the FCC rules and the requirements adopted by the
ACTA. On the bottom of the equipment is a label that contains, among other information, a
product identifier in the following format:
• US: A5TOT00BMC60X
If requested, this number must be provided to the telephone company.
Industry Canada
This equipment complies with Industry Canada CS03 Standard, Certificate Number:
- IC:336A-MC60X.
This Class A digital apparatus meets all requirements of the Canadian Interference-Causing
Equipment Regulations.
Cet appareil numérique de la classe A respecte toutes les exigences du Règlement sur le
matériel brouilleur du Canada.