Allied Telesis AT-MC602 manual

AT-MC601 and AT-MC602 Installation and User’s Guide

The Configuration Saved pop-up shown in Figure 22 will appear when the set rate or the highest possible rate has been achieved.

Figure 22 Configuration Saved

An unsuccessful configuration attempt may include the following status reports:

Loading defaults

Can’t read link status

Done

These negative status reports may also be accompanied by error message pop-ups. Error messages are explained in ”Troubleshooting” on page 47.

HIGH -> LOW/LOW -> HIGH

Allows you to choose the negotiation direction for the modem speed. The default and preferred direction is Low -> High. Choosing a negotiation direction determines how the modem searches for speeds. When set to Low -> High, the modem will start at minimum speeds and keeps negotiating progressively higher speeds until it has achieved its maximum speed for the connection.

Apply

Press the Apply button to set your data transfer rates and negotiation direction selections.

About

Use the About button to display the version number of the AT-S57 configuration software.

VDSL Status To view the VDSL Status screen, click on the VDSL Status tab at the top of the menu.

40