Allied Telesis AT-MC602

AT-MC601 and AT-MC602 Installation and User’s Guide

of time, a timeout will occur. After a timeout, the default configuration

parameters will be used to establish a link with the highest possible

speed. The default configuration parameters start at 0.94 Mbps

upstream and downstream with negotiation set from Low -> High.

Select the option that corresponds to your mode choice and click the

Apply button.

When the mode has been set, the AT-MC60x Configurator Done

message will appear, as displayed in Figure 26.

Figure 26 Done Message

When you have finished setting the mode on the Subscriber unit, click

the Close button on the bottom right of the AT-MC60x Configurator

menu to exit from the configuration software.

Contents

Main Page Electrical Safety and Emission Statement Page Contents Page Preface How This Guide is Organized Document Conventions Contacting Allied Telesyn Technical Support Chapter 1 Product Description Summary of Features Overview Location of Components Figure 2 illustrates the front panels of the AT-MC601 and AT-MC602 network extenders. Figure 3 Rear Panel Hardware Features VDSL Line Port PSTN Port 10/100 Mbps Twisted Pair Ethernet Port Page Status LEDs MGMT Port Management Cable AC Power Supply Input Port External AC/DC Power Adapter Software Features Chapter 2 Installation Installation Safety Precautions Additional Compliance Warning Statements Selecting a Site for the Network Extender Cables Not Included Unpacking the Network Extender Installing the AT-MC601 Subscriber Unit Using the Subscriber Unit on a Desktop Wall-Mounting the Subscriber Cabling the Subscriber Unit Powering On the Subscriber Installing the AT-MC602 Provider Unit AT-MC601 and AT-MC602 Installation and Users Guide 31 2. Then, set the slider in the chassis, as shown in Figure 14. VDSL EXTENDED ETHERNET AT-MC601 Figure 14 Rack Mount - Set in Rack POWER Cabling the Provider Unit Figure 16 PSTN to Telco PBX Line MCR12 Internet Service Provider Telco PBX Line Powering On the Provider Page Chapter 3 Configuration Starting a Configuration Session Downloading Software Updates Cabling Preparations Opening the Configuration Software Configuring the Provider Unit Configuration Page VDSL Status Page Ethernet Status Page Page Configuring the Subscriber Unit Page Chapter 4 Troubleshooting LEDs Error Messages Page Page Appendix A Default Configuration Settings Appendix B Technical Specifications Physical Specifications Environmental Specifications Power Specifications Page Appendix C Translated Electrical Safety and Emission Information