Installing the AT-MC602 Provider Unit | Allied Telesis manual

AT-MC601 and AT-MC602 Installation and User’s Guide

Installing the AT-MC602 Provider Unit

The AT-MC602 Provider unit can only be installed in an AT-MCR12 rackmount chassis.

Warning

To prevent exposure to electric shock, the AT-MC602 Provider Unit must be installed in a RESTRICTED ACCESS LOCATION and performed by QUALIFIED SERVICE PERSONNEL.

Note

For Finland, Norway, and Sweden – When the AT-MC602 and the AT-MCR12 are used, a permanent ground conductor must be installed on the AT-MCR12 chassis.

For installation instructions of this ground conductor, refer to the AT-MCR12 Media Converter Rackmount Chassis Installation Manual (PN 613-10725-00).

To install the Provider unit in an AT-MCR12 rackmount chassis, perform the following steps:

1.Attach the unit to one of the sliders that will hold the unit in the chassis, as shown in Figure 13.

	ERR	LINK
LINE			PSTN
			MGMT	EXTENDED ETHERNET
				VDSL
10BaseT/ 100BaseTX	LINK	ACT	PWR	AT-MC601

Figure 13 Rack Mount - Set on Slider

30

Image 30

Allied Telesis manual Installing the AT-MC602 Provider Unit, Rack Mount Set on Slider

Contents

Installation and User’s Guide Page Electrical Safety and Emission Statement Declaration Of Conformity AT-MC601 and AT-MC602 Installation and User’s Guide Contents Appendix a Preface How This Guide is Organized Document Conventions Contacting Allied Telesyn Technical Support Summary of Features Product Description Overview Vdsl Line through Location of Components Front Panels Hardware Features Pin Assignment Pstn Port 10/100 Mbps Twisted Pair Ethernet Port Pass-through 6/1 Pin MDI Signal MDI-X Signal TX+ RX+ Color Description 10/100Base-TX PortLine Port RS-232 Pin DIN Pin Signal Management Cable AC Power Supply Input Port External AC/DC Power Adapter Software Features Installation Installation Safety Precautions Europe-ECOther Countries Additional Compliance Statements Selecting a Site for the Network Extender Cables Port Connector Cables Not Included Unpacking the Network Extender Installing the AT-MC601 Subscriber Unit Using Subscriber Unit On a Desktop Positioning The Switch Onto The Wall Screws Wall-Mounting Subscriber Unit Pstn to Telephone Powering On Subscriber Unit Power On The Subscriber Unit Installing the AT-MC602 Provider Unit Rack Mount Set on Slider Rack Mount Set in Rack Internet Service Provider Provider Unit Powering On Provider Unit Warranty Registration Configuration Starting a Configuration Session Downloading Software Updates Cabling Preparations Opening Configuration Software Configuring the Provider Unit Upstream/Downstream Max Mbps Actual MbpsMin Mbps Status Apply About Mean Square Error SNR of Received SignalCorrected RS errors /s Full Constellation Link TC Synchronized Signal DetectedReduced Constellation Link Ethernet Encapsulation Sync Collision Counters Error CountersTxRx Counters Clear Stop/Start Configuring the Subscriber Unit InstallNormal AT-MC601 and AT-MC602 Installation and User’s Guide Troubleshooting Communication Error Message Run on S Side Error Message AT-MC601 and AT-MC602 Installation and User’s Guide Default Configuration Settings Environmental Specifications Technical SpecificationsPhysical Specifications Power Specifications Safety and Electromagnetic Compatibility Certifications Translated Electrical Safety and Emission Information Safety Europe-ECOther Countries Sicherheit 6 Gefahr Durch Blitzschlag Sikkerhed Europe EC 6 Fare Under Uvejr Veiligheid 6 Gevaar Voor Blikseminslag Sécurité 6 Danger De Foudre Standardit Tämä tuote on seuraavien standardien mukainen 6 Salamaniskuvaara Standard Questo prodotto è conforme ai seguenti standard 6 Pericolo Di Fulmini Sikkerhet 6 Fare For Lynnedslag Segurança 6 Perigo De Choque Causado Por Raio Seguridad 6 Peligro De Rayos Säkerhet 6 Fara För Blixtnedslag