Installing the AT-MC601 Subscriber Unit | Allied Telesis AT-MC602

AT-MC601 and AT-MC602 Installation and User’s Guide

Installing the AT-MC601 Subscriber Unit

Using the

Subscriber Unit

on a Desktop

The AT-MC601 Subscriber unit will most likely be used as a stand-alone device, or can be used as a desktop device, or mounted onto a wall, using the keyholes on the bottom of the unit. The screws and plastic anchors used for mounting the unit are provided.

To use the Subscriber unit on a desktop, perform the following procedure:

1.Remove all equipment from the package and store the packaging material in a safe place.

2.Attach the four protective feet (provided) to each corner of the bottom of the unit, as illustrated in Figure 6.

LINK ERR

PSTN

LINE

ETHERNET EXTENDED VDSL MC601-AT

MGMT

PWR

ACT

LINK

100BaseTX 10BaseT/

Figure 6 Attaching Protective Feet to the Subscriber Unit

26

Image 26

Allied Telesis AT-MC602 manual Installing the AT-MC601 Subscriber Unit, Using Subscriber Unit On a Desktop

Contents

Installation and User’s Guide Page Electrical Safety and Emission Statement Declaration Of Conformity AT-MC601 and AT-MC602 Installation and User’s Guide Contents Appendix a Preface How This Guide is Organized Document Conventions Contacting Allied Telesyn Technical Support Summary of Features Product Description Overview Vdsl Line through Location of Components Front Panels Hardware Features Pin Assignment Pstn Port 10/100 Mbps Twisted Pair Ethernet Port Pass-through 6/1 Pin MDI Signal MDI-X Signal TX+ RX+ Line Port Color Description10/100Base-TX Port RS-232 Pin DIN Pin Signal Management Cable AC Power Supply Input Port External AC/DC Power Adapter Software Features Installation Other Countries Installation Safety PrecautionsEurope-EC Additional Compliance Statements Selecting a Site for the Network Extender Cables Port Connector Cables Not Included Unpacking the Network Extender Installing the AT-MC601 Subscriber Unit Using Subscriber Unit On a Desktop Positioning The Switch Onto The Wall Screws Wall-Mounting Subscriber Unit Pstn to Telephone Powering On Subscriber Unit Power On The Subscriber Unit Installing the AT-MC602 Provider Unit Rack Mount Set on Slider Rack Mount Set in Rack Internet Service Provider Provider Unit Powering On Provider Unit Warranty Registration Configuration Starting a Configuration Session Downloading Software Updates Cabling Preparations Opening Configuration Software Configuring the Provider Unit Upstream/Downstream Max Mbps Actual MbpsMin Mbps Status Apply About Mean Square Error SNR of Received SignalCorrected RS errors /s Full Constellation Link TC Synchronized Signal DetectedReduced Constellation Link Ethernet Encapsulation Sync Collision Counters Error CountersTxRx Counters Clear Stop/Start Normal Configuring the Subscriber UnitInstall AT-MC601 and AT-MC602 Installation and User’s Guide Troubleshooting Communication Error Message Run on S Side Error Message AT-MC601 and AT-MC602 Installation and User’s Guide Default Configuration Settings Environmental Specifications Technical SpecificationsPhysical Specifications Power Specifications Safety and Electromagnetic Compatibility Certifications Translated Electrical Safety and Emission Information Other Countries SafetyEurope-EC Sicherheit 6 Gefahr Durch Blitzschlag 6 Fare Under Uvejr SikkerhedEurope EC Veiligheid 6 Gevaar Voor Blikseminslag Sécurité 6 Danger De Foudre Standardit Tämä tuote on seuraavien standardien mukainen 6 Salamaniskuvaara Standard Questo prodotto è conforme ai seguenti standard 6 Pericolo Di Fulmini Sikkerhet 6 Fare For Lynnedslag Segurança 6 Perigo De Choque Causado Por Raio Seguridad 6 Peligro De Rayos Säkerhet 6 Fara För Blixtnedslag