Allied Telesis AT-MC602 manual Wall-Mounting Subscriber Unit

Wall-Mounting

the Subscriber

Unit

AT-MC601 and AT-MC602 Installation and User’s Guide

The Subscriber unit can be mounted onto a wall using the keyholes on the bottom of the unit. The screws and plastic anchors used for mounting the unit are provided.

To wall-mount the Subscriber Unit, perform the following procedure:

1.If attached, remove the protective feet, data cables, and power cord from the unit.

2.Select a wall location for the device.

3.Install the screws and plastic anchors onto the wall, as shown in Figure 7.

LINK
ERR	PSTN
	LINE

ETNR	HEET
MGMT

EDDN
TEEX
LSVD	MC601-AT
	PWR
	ACT
LINK
aseT/100BaseTX
10B

Figure 7 Installing the Screws and Plastic Anchors Onto The Wall

4.Position the switch onto the wall screws so that the ports are facing the ceiling, as shown in Figure 8.

-MC601 AT

Figure 8 Positioning The Switch Onto The Wall Screws

27