Displaying Repeater Statistics
Use the Repeater Statistics screen to display statistics for the 10 Mbps and 100 Mbps stack segments. These values can be used to indicate the approximate loading for each segment, as shown in Figure 16 and defined in Table 17.
Repeater Statistics |
| ||
Refresh Statistics | |||
| Reset Counter |
| |
|
| 10M Segment | 100M Segment |
Frames | : 1391288 | 1391288 | |
Bytes | : 1 |
| 0 |
Collisions | : 267 | 0 | |
Aligment Errors | : 0 |
| 0 |
CRC Errors | : 0 |
| 0 |
Total Errors | : 6219780 | 6219780 | |
<PREV_PANEL>
Refresh current statistics screen.
Use TAB or Cursor keys to move, <Enter> to confirm.
| Figure 16 Repeater Statistics Screen |
| Table 17 Repeater Statistics Parameters |
|
|
Parameters | Description |
|
|
|
|
Refresh Statistics | Refresh the displayed statistics. |
|
|
Refresh statistics at the interval specified in Console Configuration. | |
|
|
Frames | Number of frames passing through this device. |
|
|
Bytes | Number of bytes passing through this device. |
|
|
Collisions | Number of simultaneous node transmissions detected by this |
| device. |
|
|
Alignment Errors | Number of |
|
|
CRC Errors | Number of Ethernet Cyclic Redundancy Check errors detected by |
| this device. |
|
|
Total Errors | Total number of errors, including FCS, alignment, FramesTooLong, |
| ShortEvents, LateEvents, Jabber, and DataRateMismatches |
| detected on this device. |
|
|
24
