Allied Telesis fast ethernet 10/100 hubs Displaying System Information, Parameter Description

Displaying System Information

AT-FH812u and AT-FH824u User’s Guide

Use the System Information screen to display descriptive information about the hub, or for quick system identification, as shown in Figure 3 and Table 2.

------------------------------------------------------------

	System Information
System Description	: CentreCOM FH812U
System Object ID	: 1.3.6.1.4.1.259.5.7
System Up Time	: 134367 (0 day 0 hr 22 min 23 sec)
System Name	: dual-speed hub
Contact	: system administrator
Location	: headquarters
<APPLY>	<OK>	<CANCEL>
	The name of this system.

<Ctrl-F> forward a char, <Ctrl-B> backward a char.

------------------------------------------------------------

Figure 3 System Information Screen

Note

Pressing the <APPLY> button makes all changes permanent by writing them to

EEPROM.

Pressing <OK> implements all changes temporarily--these changes will be voided if the system is reset.

Pressing <CANCEL> will drop any changes as long as the <APPLY> or <OK> buttons have not been pressed, and will exit to the parent menu.

	Table 2 System Information Parameters
Parameter	Description
System Description	System hardware description.
System Object ID	Object identifier for the hub's network management subsystem as
	defined in MIB II.
System Up Time	Length of time the current management agent has been running.
	(Note that the first value is seconds.)
System Name1	Name assigned to the hub system.
Contact2	Contact person for the system.
Location3	Specifies the area or location where the system resides.

1, 2, 3: Maximum string length is 255, but the screen only displays 44 characters. You can use the arrow keys to browse the whole string.

7