Allied Telesis fast ethernet 10/100 hubs manual Port Administration Status Control Parameters

AT-FH812u and AT-FH824u User’s Guide

	Table 9 Port Administration Status Control Parameters
Parameters	Description
Admin State	Allows you to disable a port due to abnormal behavior (e.g.,
	excessive collisions), and then re-enable it after the problem has
	been resolved. You may also disable a port for security reasons.
Link State	Indicates if the port has a valid connection to an external device.
Partition	Indicates if the port is partitioned.
Mode	Sets the transmission speed to 10 Mbps, 100 Mbps or auto-
	detection.
Speed	Indicates the transmission speed currently used by this port.

17