Changing System Passwords
Configuring the
Out-of-Band
Console
Displaying
Statistics
The User Passwords screen is used to display or modify user names and passwords for the
Passwords can consist of up to 14 alphanumeric characters and are not case sensitive. The configuration program will allow a user three attempts at entering a password before locking the user out by terminating the connection. If for some reason your password is lost, or you can not gain access to the System Configuration Program, contact Allied Telesyn tech support for assistance. System password parameters are defined in Table 15.
| Table 15 System Password Parameters | |
|
|
|
Parameters |
| Description |
|
|
|
|
|
|
Admin name: admin |
| Administrator has access privilege of Read/Write for all |
|
| screens. |
|
|
|
Password: null |
|
|
|
|
|
Guest name: guest |
| Guest has access privilege of Read Only for all screens. |
|
|
|
Password: null |
|
|
|
|
|
The Console Configuration screen is used to configure the console connected to the hub's serial port. The console parameters are described in Table 16.
| Table 16 |
|
|
Parameters | Description |
|
|
|
|
Lockout Status | Enables/disables the lockout function. |
|
|
Lockout Delay Time | If no input is received from the attached device after this interval |
| (in minutes), the current session is closed. |
| Range: 0 - 99 minutes. Default is 10 minutes. |
|
|
| Specifies the interval at which statistics are read from the hub. |
| Options: 30, 60, 120, 180, 300 seconds. Default is 30 seconds. |
|
|
The Statistics section on the Main Menu provides data on traffic passing through the stack segments, hubs, ports, and each of the optional media modules. The statistics these screens provide are described in the following sections.
23