AT-FH812u and AT-FH824u Software
Introduction
The AT-FH812u and AT-FH824u hub (and the connected stack) is managed through a direct console or modem connection to the AT-FH801u network management agent module's serial port, using Telnet to access the hub over the network, a standard browser to access the Agent Module's embedded web agent, or with SNMP-based network management software. Once you connect a terminal or PC to the serial port on the hub, you can perform the following tasks:
❑Enable/disable any port
❑Set the communication mode for any port
❑Configure SNMP parameters
❑Select RMON options
❑Configure port security
❑Display system information or statistics
❑Download system firmware
❑Restart the system
