BASIC OPERATIONS (CONT.)
11. PITCH ADJUSTMENTS:
This function will increase or decrease a tracks playback speed or "PITCH," this is not a momentary change as in "PITCH BENDING" (see page 19). The maximum pitch bend percentage allowed is
Activating the Pitch Slider (23): To activate the PITCH SLIDER (23), turn the pitch function on. Press the PITCH BUTTON (7) to turn on the pitch function, when the pitch function is activated a LED will begin to glow (or flash depending on what pitch percentage value is selected, see changing pitch values on page 18). If the pitch function is not activated neither the PITCH SLIDER (23) nor the PITCH BEND BUTTONS (15 & 16) will not function.
Figure 12
Using the Pitch Slider (21): To use the PITCH SLIDER (23) slide the slider up and down. Down will increase the pitch and up will decrease the pitch. When the slider is in the center position, a green LED just left of the slider will glow. When this slider LED is glowing there is zero pitch being applied to a track.
Figure 13
Adjusting the Pitch Slider's Range (21): You may change the PITCH SLIDER'S (23) operating range. To change the operating range be sure the pitch function is turned on, see figure 17. The pitch percentage can be changed between
Figure 14
©American Audio® - www.americandj.com -
