LIQUID CRYSTAL DISPLAY (LCD) CONT.
58, & 59). As with the TIME METER (57, 58, & 59), this bar is also dependent on the selected time function TOTAL REMAIN (66), REMAIN (62) OR ELAPSE (56). This bar will begin to flash when 15 seconds of a track remain and will begin to rapidly flash when three seconds of a track remain. The flashing bar is a great visual reminder a track is about to end. The flashing bar will function regardless of which time mode the unit is in.
62.REMAIN INDICATOR - This indicator is in direct reference to the TIME METER (57, 58, & 59). When the REMAIN indicator is displayed in the LCD (14), the time defined will refer to a single track's remaining time. The time mode is changed by tapping on TIME BUTTON (5).
63.DATA/FX INDICATOR - This icon will display when the DATA function is engaged. When the DATA function is engaged the buttons along the top of the LCD (14) will function as they are detailed. When this icon is off the buttons along the top of the LCD (14) will function as direct track access buttons.
64.RELOOP INDICATOR - This icon will display when a LOOP is engaged or is set and ready to be engaged.
65.LOOP - This icon flashes when a loop is engaged or displays when a loop is not engaged but is set and ready to be engaged.
66.TOTAL REMAIN INDICATOR - This indicator
is in direct reference to the TIME METER (57, 58, & 59). When the TOTAL REMAIN indicator is displayed in the LCD (14), the time defined will refer to a disc's total remaining time. The time mode is changed by tapping on TIME BUTTON
(5).
67.SINGLE INDICATOR - This indicates the unit is in single play mode, the unit will play a single and return to CUE mode. If the single indicator is not displayed the unit is in continuous mode. In continuous mode the drive will play through all the tracks on the disc. Once all the tracks have ended the unit will return to cue mode.
68.1 INDICATOR - This indicator is in direct reference to the REPEAT (69) indicator and repeat program play function (see programming on page 23). When the repeat function is first
activated, the unit enters a repeat track mode. This mode will repeat a single track over and over until the repeat function is disengaged. The single track repeat function is indicated by the REPEAT
(69)and 1 icons in the LCD (14).
69.REPEAT INDICATOR - This indicator is in direct reference to the repeat program play func- tion (see programming on page 23). When the repeat function is activated the "REPEAT" (69) icon will display in the LCD (14). When the repeat function is first activated, the unit enters a repeat track mode. This function is indicated by the REPEAT (69) and 1 (68) icons in the LCD (14).
©American Audio® - www.americandj.com -
