American Audio DIGI-PRO operating instructions Product Information, Line Voltage Selection

PRODUCT INFORMATION

I.Heat - The CD player should be situated away from heat sources such as radiators, heat registers, stoves, or other appliances (including amplifiers) that produce heat.

2.Do not let insecticides, benzene, or thinner come in contact with the surface of the unit.

3.Never disassemble or modify your unit in any way, doing so will void your manufactures warranty.

4.Never plug this unit in to a dimmer pack

5.Do not attempt to operate this unit if it becomes damaged in any way.

6.This unit is intended for indoor use only, use of this product outdoors voids all warranties.

7.Always mount this unit in safe and stable matter.

8.Disconnect from main power before making any type of connection.

9.Cleaning -

•The CD Player should be cleaned only as recommended by the manufacturer. Use a soft cloth to wipe down the outside of the unit. For stubborn stains moisten a soft cloth with class cleaner or other mild detergent to wipe away any stains. Use a soft cloth to wipe any residual cleaner. Never use volatile cleaners such as benzene, solvent, or thinner to clean your unit, these cleaners will damage the units surface.

•Cleaning the pick-up lens - The pick-up lens should not become dirty under normal usage. If the lens does become dirty, contact American Audio Technical Support for further instructions. Third party lens cleaners avail- able but not highly recommended. Use of some of these cleaner may damage the pick- up lens, be sure to follow extreme caution when using these types of cleaners.

This unit has been thoroughly tested and has been shipped in perfect operating condition. Carefully check the shipping carton for damage that may have occurred during shipping. If the carton appears to be damaged, carefully inspect your unit for any damage. Be sure all acces- sories needed to operate the unit has arrived intact. In the event damage has been found or parts are missing, please contact our toll free customer support number for further instruc- tions. Please do not return the unit to your dealer without fi rst contacting customer sup- port.

LINE VOLTAGE SELECTION

•The desired voltage may be set with the VOLTAGE SELECTOR switch on the rear panel (using a flat head screw driver).

•Do not force the VOLTAGE SELECTOR switch as this may cause damage

•If the VOLTAGE SELECTOR switch does not move smoothly, please contact a quali- fied service technician.

SCRATCH BOX		DIGITAL			SCRATCH BOX			DIGITAL
INPUT			OUT		INPUT			OUT
			AC INPUT 115/230 V, 50/60 Hz
CONNECT TO	AUDIO OUT					CONNECT TO	AUDIO OUT
CONTROL 2			Voltage Selector			CONTROL 1
	R	L					R	L
2					CAUTION		1
			115V	230V	ELECTRICAL SHOCK
					RISK OFDO NOT OPEN

Voltage Line Selector Switch

WARRANTY INFORMATION

The DIGI-PRO™ carries a TWO year (730 days) limited warranty. This warranty covers parts and labor. Please fill out the enclosed warranty card to validate your purchase and warranty. All returned service items whether under warranty or not, must be freight pre-paid and accompany a return authorization (R.A.) number. If the unit is under warranty, you must provide a copy of your proof of purchase invoice. Please contact American Audio® cus- tomer support at (800) 322-6337 for a R.A. number.

©American Audio® - www.americandj.com - DIGI-PRO™ Instruction Manual Page 5