American Audio DIGI-PRO operating instructions Advanced Operations

ADVANCED OPERATIONS

BUILT-IN EFFECTS: The DIGI-PRO™ comes with two built in effects. Only one effect may be used at any given time. The Built-in effects include FILTER and Coast. When either effect is activated a corresponding icon will display in the LCD. For example when the FILTER EFFECT (3) is activated a "1" (50) icon will display in the LCD (14). You can choose to use the effects with their default setting or you may choose activate the FILTER/COAST/ADJUST (1) function to increase the effect parameters (see below). Each effect has two sets of parameters. All parameters will be reset to there default values when power is shut off.

1. SCRATCH EFFECT - This button activates the SCRATCH effect. This effect can only be used in conjunction with an American DJ Scratch Box.™ When the SCRATCH effect is engaged you may use any turntable to simulate real time scratch of any CD loaded in the CD transport. In actuality the turntable will simulate many functions such as scratching, start-up, stop, and power-off.

Figure 36

2. COAST EFFECT: This effect simulates turning the power off on a turntable, which cause a turntable platter to slowly spin down until it loses momentum and stops. The COAST effect may also be used to simulates a turntable slowly revving up to it's proper speed.

To activate the COAST effect be sure the DTA/FX BUTTON (22)

(22)is off and press the COAST BUTTON (11). When the COAST effect is selected the "2" icon displays in the LCD (14).

Figure 37

3.COAST EFFECT Parameters: The coast effect parameters can be adjust to 10msec of second to 9.9 seconds. In effect this is the total time the effect will last. To adjust the effect parameters; Turn on the FILTER/COAST/ADJUST BUTTON (1). Once the FILTER/COAST/ ADJUST function has been activated use the Jog Wheel to adjust the parameters. All parameters will return to their default settings once the unit has been powered down.

Figure 38

Figure 38

American Audio® • DIGI-PRO™ INSTRUCTION MANUAL • PAGE 26