CUSTOMER SUPPORT
Customer Support: American Audio® provides a toll free customer support line, to provide set up help and to answer any question should you encounter problems during your set up or initial operation. You may also visit us on the web at www.americandj.com for any comments or suggestions. For service related issue please contact American Audio®. Service Hours are Monday through Friday 9:00 a.m. to 5:00 p.m. Pacifi c Standard Time.
Voice: | (800) |
Fax: | (323) |
support@americandj.com |
Warning! To prevent or reduce the risk of electrical shock or fi re, do not expose this unit to rain or moisture.
Caution! There are no user serviceable parts inside this unit. Do not attempt any repairs yourself, doing so will void your manufactures warranty. In the unlikely event your unit may require service please contact customer support. Please do not return to your dealer without fi rst contacting customer support.
SET-UP
1.Checking the Contents:
Be sure your
1) | 1) | ||
1) | Scratch Box | 1) | |
1) | Scratch Box External 12V Power Supply | 1) | Scratch Box 1/8" Male to Male, Stereo Mini Plug |
2) | Dual Male to Male RCA cable. | 2) | |
1) | Warranty card. | 1) | Operating instructions (this booklet). |
2.Installing the Units
1)Place your unit on a flat surface or mount it in a secure case such as optional
2)Be sure the player is mounted in a well ventilated area where it will not be exposed to direct sunlight, high temperatures, or high humidity.
3)Try to place the unit as far as possible from TVs and tuners, as the unit may cause undesirable interference.
3.Connections
1)Be sure main power is connected last to prevent any electrical damage.
2)AUDIO CONNECTIONS: Use the included RCA cable to connect the
3)CONTROL JACK CONNECTIONS: Use the supplied 1/8” mini plug cable to connect your
CAUTION: Be sure to use the supplied control cables. Using different types of cables may result in unit damage. To avoid server unit damage, be sure main power is off when connecting the control cables.
CAUTION:
•The player will work normally when the main unit is mounted with the front panel within 15 degrees of the vertical plane. If the unit is tilted excessively, discs may not be loaded or unloaded properly.
(Figure 1)
CAUTION:
•The LCD is designed to be clearly visible within the angles shown in Figure 2. Mount the control unit so that the visual angle is within this range.
Figure 1 | Figure 2 |
©American Audio® - www.americandj.com -
