Unpacking
2.0 Unpacking
NOTICE!
Unless otherwise specified by the shipping company use a fork lift to unload equipment from pallet
1.To unpack UPS unit, remove top and bottom screws from side plates of packaging and lift up side plates
2.Verify compliance between type label on reverse side of front door and system ordered. Check input and output voltage
3.Copy type label data to label copy below for easy identification of system
4.Use fork lift to transport system to installation site
Copy of type label
PLEASE RECYCLE
The shipping materials for the APC Silcon UPS are recyclable. Please save them for later use or dispose of them appropriately.
6 | Installation Guide APC Silcon |
