32 Smart Distribution Panel with ATS
Load-Meter

Total Load by Phase

Total Load Summary

Power Factor

Total Load by Phase
Total Load Summary
Power Factor
Sub-Feed Monitoring
For each phase (L1, L2, L3) the following information is displayed:
kVA The apparent power provided, in kilovolt amps.
Iout The output RMS load current.
%LD The load as a percentage of the maximum allowable load.
For the total load supported, the following information is displayed:
kW The active power drawn by the load, in kilowatts.
kVA The apparent power provided, in kilovolt amps.
Freq The frequency, in hertz.
PF Power factor, the ratio between active power and apparent power (kW/kVA), which affects
the power available to the load.
%LD The load as a percentage of the maximum allowable load.
Displays the following power factor data for each phase (L1, L2, L3):
kVA The apparent power provided, in kilovolt amps.
kW The active power drawn by the load, in kilowatts.
PF The ratio between active power and apparent power (kW/kVA), which affects the power
available to the load.