RESTORE FACTORY DEFAULTS MENU
This control system menu allows the user to restore most of the control system’s user settings to their factory default settings. User settings in the Alarm Output Setup and
Display Settings menus are unaffected by executing Restore Factory Defaults.
Restore Factory Defaults
ACTION | DISPLAY |
From the Main Menu use the Up/Down buttons to select (highlight in black) the “Restore Factory Defaults” menu.
Press the Operational Button underneath “SELECT.” The Restore Factory Defaults menu will be displayed.
From the Restore Factory Defaults menu press the Operational Button underneath “YES.” The display will show text confirming the factory default settings have been restored.
Press the Operational Button underneath “BACK” to exit the Restore Factory Defaults menu.
Factory Default User Settings
TEMPERATURES MENU | DEFAULT SETTING | ADJUSTABLE RANGE |
|
|
|
Operating Set Point | 120°F (49°C) | 90ºF to 190ºF (32°C to 88°C) |
|
|
|
Differential Settings | 2°F (1°C) | 1°F to 20°F (1°C to 11°C) |
|
|
|
Tank Probe Offset | 0°F (0°C) | |
|
|
|
ECONOMY MODE SETUP MENU | DEFAULT SETTING | ADJUSTABLE RANGE |
|
|
|
Setpoint Adjustment | 20°F (11°C) | 2°F to 50°F (1°C to 28°C) |
|
|
|
Daily Operating Mode | Normal Operation All Day | See page 55 |
|
|
|
ALARM OUTPUT SETUP MENU | DEFAULT SETTING | ADJUSTABLE RANGE |
|
|
|
Alarm Output Function | Disabled | See page 59 |
|
|
|
Alarm SP | 100 (38°C) | 90ºF to 190ºF (32°C to 88°C) |
|
|
|
DISPLAY SETTINGS MENU | DEFAULT SETTING | ADJUSTABLE RANGE |
|
|
|
Temperature Units | °Fahrenheit | °Fahrenheit or °Celsius |
|
|
|
Backlight Delay | 10 Seconds | Always off/on, 10, 30, 60 Sec |
|
|
|
Contrast | 30% | 20% to 100% |
|
|
|
Servicing should only be performed by a Qualified Service Agent
63
