3.Rotate the Green Printhead latch counter-clockwise to open the printhead module.

4.Rotate the Side Access Door down to allow the ribbon to be loaded under the printhead module. This will allow you to slide the ribbon under the printhead without having to

Printhead Latch

Upper Media Sensor Arm

Lower Media Sensor Arm

Side Access Door

thread it under the module.

Figure 10 - Printhead Latch and Side Access Cover

5.Unwrap the ribbon and place the Ribbon Supply Roll on the Ribbon Supply Spindle located towards back of printer.

Take-up Spindle

Supply Roll and Supply Spindle

Empty Take-up core

Figure 11 - Ribbon Take-Up Core

16 User's Guide

Page 17
Image 17
AMT Datasouth 4000 manual Printhead Latch and Side Access Cover