Unpacking and Inspection

This section is provided to assist you in taking the printer from the shipping container to the application environment and ready for use.

1.Remove top foam packing piece.

2.Lift printer straight up out of box carefully with adequate assistance.

3.Remove accessory kit and supplies.

4.Remove printer from plastic bag.

NOTE: Save box and all packing materials for future use, in the event the printer needs to be shipped.

Verify that the printer box contains the following materials when unpacking:

a.Printer

b.User’s Manual

c.Power cord

d.Diskette(s) or CD for Windows 95/98/2000/NT and Label Design Software

e.Take up Core

f.A ribbon roll and a take-up ribbon core.

g.A media roll (not pictured)

Figure 3 - Shipped with Printer

User's Guide 9