Serial port settings

Baud rate: 2400, 4800, 9600, 19200 and 38400.

To change the Baud Rate:

FM4402: Send the <STX>KI8n command to the printer. See the System Setting Commands section for more details.

FM4602/4603: The switches on the back of the printer control Baud Rate. See the Back Panel Switches section for more details

Data format: always 8 data bits, 1 start bit and 1 stop bit.

Parity: always no parity

Handshaking: XON/XOFF as well as CTS/RTS (hardware flow control).

Note: If you run an application with the bundled printer driver under Windows and use the serial port, you should check the above parameters and set the flow control to “Xon/Xoff” or “hardware”.

User's Guide 81

Page 82
Image 82
AMT Datasouth 4000 manual Serial port settings