AMT Datasouth 4000 Back Panel Switches FM4602 and FM4603 models only, Standard Switch Settings

Back Panel Switches (FM4602 and FM4603 models only)

Back Panel Switches are only available on FM4602 and FM4603.

Any change in switch position is not registered until Power is cycled.

Standard Switch Settings

Switch	Function	Position	Description
Number		setting
1	Thermal	ON	Ribbon is installed. Thermal transfer mode. Enables
	Transfer		end-of-ribbon detection. If end-of-ribbon occurs the
	Ribbon		RIBBON and READY indicators will blink.
		OFF	Ribbon is not installed. Direct thermal.
2	Euro Mark	ON	PPLA: Alternate (printable) control code set.
			PPLB: Euro dollar symbol is used to replace the
			character ‘_’.
		OFF	PPLA: Standard control set.
			PPLB: No Euro symbol.
3	Cutter	ON	Cutter is installed.
		OFF	Cutter is not installed.
4	Gap Size	ON	The gap length is more than 4 mm.
		OFF	Media with normal gap or continuous media.
5		ON	Peeler is installed.
		OFF	Peeler is not installed.

46 User's Guide