Notes:
Command | Description | Parameter |
|
|
|
d1,hadj | Set horizontal position | hadj: adjustment in dots. |
| adjustment** |
|
|
|
|
d2,hadj | Set horizontal position | same as d1, except it is no saved to |
| adjustment | E2PROM |
|
|
|
1.x and y represent horizontal and vertical coordinate values.
2.hm and vm stand for horizontal and vertical multipliers.
3.rot is the rotation direction, its value is from 0 to 3.
4.nr is either N for normal printing or R for reverse printing.
5.string is bracket by double quote marks, e.g. “text”.
6.** Commands will cause the printer to save parameters to permanent storage (E2PROM).
7.ZS takes effect only if flash memory board is installed.
