LED Indicators
There are three LED indicators on the front panel, “READY”, “MEDIA” and “RIBBON”. These indicators display the present status of the printer.
XREADY
XMEDIA
XRIBBON
The Ready LED indicates the following conditions:
ON | - The printer's powered is on. |
Off | - The printer's power is off. |
Blinking | - Error condition (see Troubleshooting section for |
| details) |
The Media LED indicates the following conditions:
ON | - Media is installed and ready for Normal |
| operation. |
Off | - The printer's power is off. |
Blinking | - Media Out condition. |
| This condition only occurs following a media |
| motion request. |
The Ribbon LED indicates the following conditions:
ON | - The printer is set for Thermal Transfer mode |
| and the printer contains a Thermal Transfer |
| Ribbon. |
OFF | - The printer is set for Direct Thermal Mode. |
Blinking | - The printer is set for Thermal Transfer mode |
| and the ribbon is not moving or at end of life. |
| This condition only occurs following a media |
| motion request. |
