AMT Datasouth 4000 manual Procedure to Enter into Set-up Mode, FM 4602 and FM 4603 models only

Procedure to Enter into Set-up Mode

FM 4602 and FM 4603 models only

1.Power on the printer.

2.When the “ READY” message is displayed on the LCD, press [PAUSE] and the [CANCEL] buttons simultaneously.

Next Value

Next Feature

Enter Value

Press to Enter / Exit Setup Mode

Figure 24 - Entering into Set-up Mode

3.Press [PAUSE] button to scroll to the feature that you want to change.

4.Press [FEED] button to scroll to the desired value of the displayed feature.

5.Once the desired value is displayed, press [CANCEL] button to save it. After pressing the [CANCEL] button an * should appear in the last column. The * is used to designate the stored value in non-volatile memory (E2PROM).

6.Press both [PAUSE] + [CANCEL] buttons at the same time, to return to normal mode.

Note: Do not enter set-up mode while the printer is printing or while the host is sending data.

40 User's Guide