AMX 1000 Series, DCS1000 manual Testing Grouped Feedback, Adding Delay Time to a Script Example

AMX NOVARA DCS1000 Device Configuration Software

Testing Grouped Feedback

1.Download the program to the ControlPad (see the Downloading the Program to the ControlPad section on page 46).

2.Press Button 1 - the LED should illuminate.

3.Now press Button 2, this LED should illuminate, and extinguish Button 1.

Only the pressed button of 1 to 4 will stay illuminated.

Likewise only the pressed button of 5 to 8 will stay illuminated.

Delay Time

A delay time can be added in between events in a Script.

Delays can range from 0.5 seconds up to 24hours.

The delay is absolute and no other Event or Button press will be acknowledged until the time period has elapsed.

Adding Delay Time to a Script (Example)

1.Select a button, and add Flash feedback as Event 1 (FIG. 26).

FIG. 26 Button 1 selected, "Flash" Button Feedback selected and added to Script as "Event 1"

2.Click Add Time Delay to invoke the Set Time Delay window (FIG. 27).

FIG. 27 Set Time Delay window

3.Use the left/right arrow buttons to specify a time period.

Click the arrows on the Hours field to adjust hours up/down, in one-hour increments. Click the arrows on the Minutes field to adjust minutes up/down, in one-minute increments. Click the arrows on the Seconds field to adjust seconds up/down, in one-half second increments.

Novara ControlPads & KeyPads 49