AMX 1000 Series, DCS1000 manual Adding a Relay Unit, Downloading To an Auto-running panel

AMX NOVARA DCS1000 Device Configuration Software

Downloading To an Auto-running panel

To configure a panel that is currently Auto-running, the panel must be powered down and the program Downloaded within the first five seconds of power up before the panel starts auto-running again.

Adding a Relay Unit

1.Connect the relay unit to the Relay port on the ControlPad (see the Relay 1 / Relay 2 Connectors section on page 10).

2.Click the Add Relay button in the Command Bar to invoke the Select Relay window (FIG. 90).

FIG. 90 Select Relay window

3.Select the relay to control from the Select Relay drop-down menu (Relay 1 or Relay 2).

4.Select the relay action type from the Select Action drop-down menu.

On will latch the relay on,

Off will latch the relay off.

5.When the parameters have been set click on Add to Script.

Novara ControlPads & KeyPads 77