Programming the Delta System
31
Delta Series Audio Controllers
Selecting Clock (FIG. 23) will allow the user to set the Clock Time/Date/Day for the System.
Selecting Exit exits to the Main Menu (FIG. 24).
Controller Sub Menu
Programming Source Components
1. From the Setup screen, select Controller. The Controller Setup screen will be displayed.
The menu selection immediately defaults to the Exit selection in the first screen of the Controller
Set Up Menu.
2. Using the navigation button, select Program and the Program Sources screen will be displayed.
3. Select a Source to program.
4. Once a source has been selected, the Select Source Type screen will be displayed. The menu
selection immediately defaults to the Learn IR selection in the first screen of the Select Source Type
screen (FIG. 25). The source number is displayed at the top of the screen.
Learn IR will allow user to learn IR commands for the selected source
Delay allows user to add a delay to all IR commands learned for the selected source type
Label allows customization of the label for each Source Type
Quit returns user to Please Select a Source screen.
FIG. 23 Setup Menu - Clock
FIG. 24 Setup Menu - Exit
If an on-board tuner is present, Source #1 will not be displayed since the Tuner takes
up the Source #1 location
FIG. 25 Select Source Type - Learn IR
If the Source Type has not been previously selected, Select Source Type will be
displayed, otherwise it will display the named source(s) from prior programming
sessions.